- #HOW TO FORMAT MY HARD DRIVE ON A DELL INSPIRON SERIAL#
- #HOW TO FORMAT MY HARD DRIVE ON A DELL INSPIRON DRIVERS#
- #HOW TO FORMAT MY HARD DRIVE ON A DELL INSPIRON DRIVER#
- #HOW TO FORMAT MY HARD DRIVE ON A DELL INSPIRON SOFTWARE#
#HOW TO FORMAT MY HARD DRIVE ON A DELL INSPIRON DRIVER#
You can find your laptop’s model number by looking at the sticker fixed at the bottom.Ĭopy the downloaded driver files to an external USB drive or burn them to a blank disc. To do this, simply enter your laptop’s model number into the search field and download everything in the “Drivers” section.
#HOW TO FORMAT MY HARD DRIVE ON A DELL INSPIRON DRIVERS#
You can also download your laptop’s drivers from the manufacturer’s Support site. If you have a recovery disc for your laptop, it already has the drivers. Having all of the necessary drivers downloaded and ready to be installed will make the format process easier.
#HOW TO FORMAT MY HARD DRIVE ON A DELL INSPIRON SOFTWARE#
Download the drivers for your laptop.ĭrivers are software responsible for controlling your laptop’s hardware. You can use a blank DVD, an external hard drive or USB flash drive, or upload it to a cloud storage service. So before formatting your laptop, make sure you back up all of the documents, pictures, and other files that you want to save. Formatting a hard drive will delete all of the data off of it. Most laptops only support a single hard drive. If the drive does not spin up after all of these steps, please visit the Warranty page to begin a warranty replacement order.Formatting hard drive for Windows Laptop Back up all of your important data.Connect the drive in a SATA-USB enclosure or something similar if possible.If the drive is still not spinning, connect it in another computer if possible.Check the power supply on your computer to determine whether it is providing sufficient electrical power to operate the drives and devices you have in your computer.Switch power cables with a device like a CDROM or DVDROM drive, so that you are using a known-good power cable.Then repeat, only reconnect the hard drive and listen for it to spin up.Boot the computer up to see if the drive sound was audible before.Reconnect the power cord to the computer itself.Disconnect the power cable from the hard drive in question.Disconnect the power cord from the computer itself.Boot the computer and listen carefully.If you cannot determine whether the drive is spinning: If you do not hear or feel the hard drive spinning, the drive did not start. If you touch the side of the drive you should feel a slight vibration. Check to see if the hard drive is spinning. This will stop any power saving commands from being sent. Open the computer case and remove the data cable from the hard drive.To check to see if this is the cause of the BIOS not detecting the hard drive, follow these steps: If the drive is not receiving power or receiving an incorrect level of power, it will not spin up. Black connector - is used for master device connection.Grey (middle) connector - is used for slave devices on the cable.Blue connector - always connects to the motherboard.UDMA cables have colour coded connections which require proper orientation when connecting. For ATA drives, Seagate recommends using UDMA cabling with a maximum length of 18 inches.If the problem persists, then the cable was not the cause of the problem. The easiest way to test a cable is to replace it with another cable.Be sure to check your SATA cables are tightly connected to the SATA port connection. Serial ATA cables, in particular, can sometimes fall out of their connection. The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect.
#HOW TO FORMAT MY HARD DRIVE ON A DELL INSPIRON SERIAL#
Here are some images of Serial ATA cables. For further information, please see Document ID: 182453.